A bag of flour looks simple, but it is the end of a long, carefully controlled process. In a modern mill, wheat passes through dozens of machines and several laboratory checks before it becomes flour. Understanding these steps helps buyers ask better questions and explains why flour from one flour manufacturer can behave very differently from another's.
Step 1: Wheat intake and testing
Every truck or wagon of wheat is sampled before it is unloaded. The lab checks moisture, protein, test weight, foreign material and often gluten quality and falling number. Based on these results the wheat is sent to a specific silo, because a mill rarely uses a single wheat variety – it stores different qualities separately so they can be blended later.
Step 2: Cleaning
Raw wheat contains dust, straw, stones, other grains and sometimes metal. The cleaning house removes them in stages:
- Separators and aspirators sieve out large and small impurities and blow away light particles.
- Destoners use vibration and air to separate heavier stones.
- Indented cylinders sort out seeds of a different shape, such as barley or oats.
- Magnets and optical sorters catch metal and discoloured kernels.
- Scourers rub the surface of the kernel to remove dirt from the crease.
Step 3: Tempering (conditioning)
Clean wheat is then dampened with a precise amount of water and rested for several hours, typically 8 to 24 depending on the hardness of the grain. This toughens the bran so it peels away in large flakes instead of shattering into the flour, and softens the endosperm so it breaks into flour more easily. Tempering is one of the least visible steps, yet it has a major effect on flour colour and yield.
Step 4: Blending the grist
Before milling, wheats from different silos are combined in fixed proportions – the “grist”. This is where the miller designs the flour: a stronger wheat raises protein and gluten strength, a softer wheat lowers them. Blending at this stage is how a manufacturer keeps a specification stable even when the harvest changes.
Step 5: Milling on roller mills
Modern mills do not crush wheat in one pass. The grain travels through a series of steel roller pairs:
- Break rolls have fluted surfaces that open the kernel and scrape the endosperm off the bran.
- Reduction rolls are smooth and gradually grind the endosperm particles into fine flour.
After each pass the material is sifted, and only the coarse fractions go to the next roll. This gradual reduction is why a mill can produce many different flour “streams”, each with its own colour, protein and ash.
Step 6: Sifting and purifying
Plansifters – large boxes of stacked sieves that move in a circular motion – separate the milled product by particle size. Purifiers use air currents to remove small bran particles from semolina before it is reduced further. The result is a set of flour streams ranging from very white, low-ash patent flour to darker streams closer to the bran.
Step 7: Combining streams and adding ingredients
The miller combines selected streams to reach the target specification. A low-ash noodle flour uses mainly the whitest streams; a whole wheat flour adds the bran and germ back. Where a recipe calls for it, the flour can then receive additions such as enzymes, ascorbic acid or vitamins and minerals in line with the destination country's rules.
Step 8: Quality control
The finished flour is tested again: moisture, protein, ash and gluten, often complemented by dough tests on a farinograph or alveograph and a baking test. Only flour that matches its specification is released for packing.
| Stage | Main goal | Typical check |
|---|---|---|
| Intake | Know the raw material | Moisture, protein, impurities |
| Cleaning | Remove everything that is not wheat | Visual and sorter rejects |
| Tempering | Prepare kernel for milling | Moisture after resting |
| Milling & sifting | Separate endosperm from bran | Extraction and stream ash |
| Final flour | Meet the specification | Protein, moisture, ash, gluten |
Step 9: Packing and storage
Flour is packed into bags or delivered in bulk. Export flour is typically filled into 25 or 50 kg woven or paper sacks for bakeries and into smaller packs for retail. Bags are coded so every lot can be traced back to its production date and wheat blend. Storage should be cool, dry and off the floor; in hot climates, lower-moisture options such as heat-treated flour (see our special purpose flour range) keep better.
Why the process matters for buyers
Two mills can use similar wheat and still produce very different flour, because tempering, roll settings, stream selection and testing all leave their mark. When you evaluate suppliers, ask how they manage each of these steps – and request a trial bake rather than relying on the label. For specifications by application, see our bread flour guide.
Frequently asked questions
How much flour is produced from one ton of wheat?
White flour extraction is usually around 70–78%, meaning roughly 700–780 kg of flour from one ton of wheat; the rest becomes bran, germ and feed fractions. Whole wheat flour uses close to the entire kernel.
Why is wheat tempered before milling?
Adding water and resting the wheat toughens the bran so it separates cleanly and softens the endosperm, which improves flour colour and yield.
What is the difference between break rolls and reduction rolls?
Break rolls are fluted and open the kernel to separate endosperm from bran; reduction rolls are smooth and grind the endosperm into fine flour.
